Skinny Satan

A cool Nerd To Hangout With

My First Slayer Exciter.

ImageGeeks And Nerds,

First of all I would like to thank you all No life people like me that you all are gathered here to create Awesomeness.

This one is a very first project i will be posting.

A Slayer Exciter. B-)

Disclaimer :- you will be responsible for your own actions.

well its always awesome to achieve wireless electricity right??

Here is what you need to make one for yourself.

1.A PVC Pipe 1Feet long

2.28-32 Gauge many around 250M Enameled copper wire.

3.16-20 Gauge Copper wire 5-6 meter

4.A ball or anything round

5.A Nice Transistor like TIP31C or 2N3904

6.Few Resistors, Caps and UFDiodes.

so lets Begin.

Lets start with a complex part. Start winding the secondary wire to the PVC pipe from either side. And by secondary i mean the 30AWG wire. It will gonna take hours but it will look awesome when is finished. DO around 1000 turns tape it totally so it wont move. keep both ends open for now.

Next you must wind the Primary that is the thick wire around the secondary, it must be insulated. 5-6 turns are enough.

Plug the top end of secondary to a round surface covered with foil. Do check if it is going below the winding, it must not.

Now time for the Power part. The driver circuit.

Here is the schematic you must do on your board.

Image

Sorry for my bad Paint Skills 😛
Make the circuit on a General purpose board, or Breadboard.

Give it the Power. And Voila!! you will have your own Slayer Exciter. Awesome right??

Advertisements

3 comments on “My First Slayer Exciter.

  1. Vinit
    August 11, 2013

    U can build the circuit on multisim and the paste it in Microsoft office o paint . Nice work though.

  2. subhash Jadhav
    February 17, 2015

    Can i use the TV picture tube magnet wire. I guess its 32 gauge. .. Every thing ok . But where is the spark gap? we do not need the spark gap on this projects? which resistance can use?

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Information

This entry was posted on July 27, 2013 by in DIY stuff., High Voltage and tagged , , , .
%d bloggers like this: